View a Net

Locate a position or an area on a selected manifold face where a cavity can be placed to connect with a selected net.
MDTools^® displays the cavities/ports in the selected net in green and all other cavities/ports in the Dead Area color.

1.     MDTools 965 > View a Net

The View a Net dialog box displays with the list of nets in the manifold.

2.     Select the net from the Net name list.

MDTools displays the area in the selected net in green, and all other nets and dead areas of cavities in the default color for Dead Area.

The default color for Dead Area can be changed through, MDTools Settings >Net Display.

3.     Select a face.

4.     Click the face where you want to place a cavity to connect with the selected net.

MDTools displays the selected manifold face parallel to the screen.

Note:

Use  the Rotate button to rotate the block.

Reset to the Net Color

Click the Reset to Net Color button to revert to your default color setting for nets.

MDTools resets the display to the default net colors automatically.

Note:

Default colors are the colors assigned to the nets in MDTools Options or in Net Display.