MDTools 960 SP2

Applicability: MDTools 960 NW, SA & MDTools 960S.

Issues Resolved:

1. In the Cavity browser, switching from Cavities tab to Nets tab is slow.
2. In the Machining Callout Settings dialog, cursor moves randomly on pressing the Tab key.
3. Inserting Orifice with Merged cavity option is slow.
4. When cone area of a cavity is partially consumed by cylindrical area of another cavity and you measure wall thicnkess between that cone and cylindrical surface, the software freezes. 
5. Alpha angle inclination for inclined cavities does not display in the preview.
6. When the CAD model is designed upside down, the Expander plug model also gets assembled upside down for angled plugs.
7. In some specific sequence of operation, Insert X-Port command is not completed.
8. In some specific cases, Cavity Step12 (Bottom Drill) gets tapered in Feature Mode.

Enhanced:
When assembling a manifold, the CAD part files are now opened only twice.

Date: Apr 17, 2018.



MDTools 960 Hotfix 01

Applicability: MDTools 960 NW, SA & MDTools 960S with SP1.


Issues Addressed:

	Instability with SolidWorks 2018 in Feature Mode with Insert Cavity & Convert Commands.

Date: Jan 22, 2018.


MDTools 960 SP1

Applicability: MDTools 960 NW, SA & MDTools 960S.


Issues Addressed:

1.	With separate Through Drill Holes, Design Check command throws Error.
2.	Check Bend command not refreshing the Part Model display after Updating Drill Depth.
3.	Design Check, Manufacturability Check and Wall Thickness Check Commands throws Error, when a cavity is fully consumed by another profile.
4.	Coloring message changed to Removing color for Design Check preparation.
5.	Machining Chart creates blank Meet List column, if Machining ID.
6.	Insert Undercut - Preview of Undercut not shifting, for Sun Cavities, when shifted from Port No. 2 to Port No. 3, 4, 5 & 6.
7.	Editing Stamping displays edited preview along with old preview.
8.	Slowness issue while converting stamping text from Cosmetic to Engraving and vice versa.
9.	Outline not rotated along with the Cavity in Virtual Mode.
10.	Incorrect preview of Footprint Orientation while aligning Footprint.
11.	Recommended value of Drill Depth changes for Sun cavity.
12.	Cavity Center marks appearing incorrectly after changing faces of Cavities with O-ring.
13.	Unable to move cavities by specifying negative values.
14.	Error message while Creating Auto-Drawing for block having Slot with specific Machining Chart settings.
15.	Incorrect Orientation of O-ring groove while inclining Drill.
16.	Assembling multiple CAD models more than 12 in single instance using Assembly Interface producing instability.
17.	Assembling stacks in multiple instances brings more models than required.
	  	

Date: Jan 04, 2018.